Going to improve the commonwealth shopping centre, "low relief" on my layout. Will remove the plastic wills slates and balsa wood, and my plan is to put a section of SMS greyboard along where the Balsa was. Then, add in a couple of shop names, and from there, create a small roof. There will then be something new. A new wall, which will be the new outer wall of the shopping centre, with a couple of large windows to see into it. It'll be level with the top of the cutting, but I have found that in the past, this did happen, in places such as the Aldgate Casein Works in Aldgate, London. Ill then connect it, using more greyboard, to the existing Balsa wood, on the end of the road, and put a little walling on that Greyboard, to make it look as one. Thing is, my shed is insulated with the foil insualtion. Will I be able to UHU the greyboard to it? If yes, makes my job a lot easier.

Posted by Robert Clark at 2021-10-04 17:07:52 UTC