Hi all, I am having some trouble with my Cobalt IP digital point motors. I laid the track an tested all the points and had no problems. I have installed the motors which are switching fine but I have no power to the frog itself since I have installed the motors so locos are stalling as soon as they hit the frog. I followed the instructions in modifying the points by cutting the two wires and I was under the impression that the wire from the frog (green in my case) powered the frog from the cobalt. The point has power up to the point where the two wires have been removed but is dead past it. Does anyone have any ideas where I’m going wrong? Thanks, Dan

Posted by Trelawnydanbrewer at 2021-12-16 18:48:36 UTC