This simple 5 step guide will show you the basics on how to wire up your layout with minimal soldering! Step 1: Decide where your main bus wire will go, and using stick back clips, secure your positive and negative wires to the baseboard. We recommend putting the Black wire to the Back, Black to Back is easy to remember! Run one end to your DCC Controller Step 2: attach Wago connectors to the end of each board to give easy connections between your baseboard. Step 3: Solder up some wire to some Splice Connectors Step 4: attach the splice connectors to your bus wire and have them run into two Wago connectors. Do this in a central place where you’ll have lots of dropper wires. Step 5: solder dropper wires to the underside of your rails and run the wires into your wago connectors. Twist them together to keep things neat and tidy 😁 And there you have it! 5 step, simple, limited soldering wiring guide! This is a quick and effective way of wiring up your layout, so you can spend more time doing the stuff that matters! Full Free Article Coming soon, exclusive to the Railway Modellers Club!

Posted by Dylan Sanderson at 2022-01-13 12:11:33 UTC