#SL&M Servo Uncoupler - part 2 8. These are Mk1 servo mounts from Justin and are perfect for this type of application. 9. The servo has been fitted so there is plenty of room for the arm to swing. 10. I've drilled a couple of clearance holes in the base, and these are No4, 3/4" screws. 11. The servo mount is positioned so the spring wire is lined up with the hole in the arm. 12. The spring wire is then cut to length, bent to shape and fixed into the arm. All that's left to do now is programme the servo to move the plate up and down.

Posted by Stubby47 - Stu Hilton at 2022-02-09 11:53:45 UTC