To make the walls is very simple you need a large wall/floor tile as long as it does not have a pattern. a piece of 2x1 to use as a fence, a piece of 3x1 and a piece of plasticard the card in the picture is wills slate card all you do is cut a 4mm wide notch x 2mm high fix card to the 3x1 you then have the basic bits to start. As you can see the mould fits against the fence, mix some plaster pour onto the tile drag the mould down the tile and away you go

Posted by rbrindley3 AKA Fred at 2021-06-24 17:38:06 UTC