#scenicfillbegin I’ve made a start on the scenics. This piece of infill, joins the rear of the MPD, on to the start of the branch line incline. I started with a card template and then measured and transferred the details to final MDF base board. This was cut, positioned, checked and, finally screwed into position. I used small pieces of tapered card and, blocks of wood to add the necessary contours and gradients, infilling with scrunched-up hand towel. All these items were glued in place with simple PVA (white) glue Finally, using masking tape, I formed the landscape as required. Next process will be to add plaster bandage and sculpt any further landforms using wall filler.

Posted by Arboleas Junction at 2024-02-07 21:34:38 UTC