‘Space - The final frontier’. One for the Trekkies out there! I have a space that measures approx 7ft 5 inches (2260mm) long that tapers from just 6inches (150mm) wide at one end to 18inches (450mm) at the other. This will be an addition to my existing layout but will operate independent to this. However, the question is what to put in the area available & this is where you good folk come in….. There is a wealth of knowledge on this forum & I would be interested to hear your thoughts on what I could model here. Some considerations for you all. I model in: a, 00 Gauge. b, Era 8ish (1986 -97). NB - This will be lower than my existing layout by approx 5 inches so a retaining wall or embankment will be required on the ‘angled’ side. Other than that, I look forward to your suggestions.

Posted by Going2theDogs at 2024-04-07 06:37:52 UTC