#eastglassonportauthority #baseboards #backscene After a busy weekend the social battery was well and truly depleted, so an easy afternoon was required. First up was adding some packing to the underside of the boards to add an extra 6mm of height. This was done to give some more room between the servo driver and the associated connections to the servos, some more headroom between the underside and the table top to prevent damage. Secondly, I've been working on evening out the joint between the fixed and removable backscene boards and reducing the gap as much as possible before adding the backing paper. I'm also going to work on filling the gap in the backboards over the joint between the two boards, which is the current major issue before the paper backscene is added. But first, a good hoover and track clean after spending the weekend in the shed, and thankfully everything works!

Posted by Josh S at 2024-04-08 17:23:30 UTC