THREE BAY LOW RELIEF WAREHOUSE - Well, I have just completed the scratch-build of this low-relief three bay warehouse. This is another very simple build with no 'complicated' cuts. If attempting to build it you will require two sheets of 1.5mm card, some corrugated card, a 3mm x 3mm piece of pine strip and some cut offs of grey stone wrap. The model was constructed using UHU for the entire build and Pritt Stick for the application of the wraps. The model will take around 3.5 hours to complete. The plan and photographs show the process of how it was constructed. A very simple and satisfying build. I will post photographs of the completed model shortly.

Posted by Ken at 2025-05-01 18:23:48 UTC