#w2w So here is the next update for my challenge… The section of retaining wall has been affixed using black tac & the edge of the wall painted grey. Next up a plinth was required for the top of the wall & a small section of batten was found, cut to length & then painted. To maintain & consistent visual appearance with the rest of retaining wall a small stone was glued to the top using PVA. 2 small holes were drilled either side for 2 nails that will ‘pin’ the plinth to the wall. Next up is installation & merging the scene together….

Posted by Going2theDogs at 2026-05-31 15:16:09 UTC